Wireless WiFi Video Doorbell Phone Door Ring Intercom Smart Security Camera Bell

You can answer the alarm call to watch the video call immediately from your mobile app and communicate in real time. The video door intercom bell supports two-way audio. When someone presses the doorbell or a PIR-detected alarm, your mobile app will receive an alarm video call instantly. It has a 720p Cmos chipset and HD Resolution. For home surveillance and security, you may enjoy the high-quality full-HD video and picture from this doorbell. The wireless doorphone doorbell camera is suitable for an apartment or backyard. It serves as both a wireless intercom doorbell and an IP security camera for your house. Multiple features, including as WiFi, two-way audio, and motion sensors, support both the Android and iOS operating systems. The doorbell can be set outdoors and is rainproof, so you don't have to worry about it becoming wet.Supporting APP functionality, it may be used with APP software for Android, iPhone, and iPad.both day and night, with built-in IR-CUT technology and support for night vision.

Specification:

• Composition: ABS
• Dimensions: 144x74.5x32.3 mm
• Dimensions: 1280 x 720
• 140° Field of Angle of View
• 6 IR LEDs, 850 mm
• IEEE 802 11 b/g/n for Wi-Fi
• Audio: Noise-cancelling two-way talk
• Recording: SD Card Recording for the Device (20 Seconds)
• 8G/16G/32G of storage (Not Included)
• Three 18650-specification batteries are the power source (Included)
• Monitoring: Remote Live View, Motion Detection, Device Button
• Push Notifications within 2 seconds are the notification function
• Device Wakeup: Within 600 ms
• Power Consumption: Power Consumption Standby 200?A, Working 170mA

Package Contents:

• Wi-Fi doorbell, one
• Batteries, three
• Four screws
• Wrench, one
• 1 x Sticker
• 1 x User Manual
• Installing Accessories 4 times

Before beginning (Please fully charge before using the doorbell)

• Get the Aiwit App and install it.
• Search or scan the QR code

For Aiwit on Google Play or the Apple App Store.

• Download and set up the application.
• Sign up for an Aiwit account.
• In the Aiwit app, configure your device.

Follow the procedures listed below and the in-app instructions to pair your device.

•  Log into your account through the Aiwit App.
•  Select the Plus symbol to add your camera.
• The Video Doorbell option.
•  Tap Next, then tap Yes after pressing and holding the doorbell button until the red light starts to flash.
•  Tap Next after entering the 2.4GHz Wi-Fi network name and password (5GHz is not supported).
•  Use the camera on your device to scan the QR Code shown on the app, then select Confirm once the Wi-Fi setup has finished.

Note:

• Please remove the leak-proof gasket from the battery's bottom before using it.

Warning:

• You might need to recharge your battery more frequently if your device is capturing an excessive amount of events each day.
• Additionally, every time you use the Live View to see through your doorbell or speak through it, the battery is depleted.
• You can reduce the sensitivity of your motion settings to avoid having too many events.