Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount

The RCM03 is durable enough for live sound applications thanks to its aluminum structure! designed to capture vocalists, acoustic and amplified instruments, as well as room reverb, in stunning clarity. The RCM03 excels in studio applications because to its frequency pick up pattern. This microphone has a variety of applications. This can be connected directly to your computer sound card or to the phantom power of your mixer. The two cords are included! Both a connection to attach the microphone to your computer and a cable to connect it to your mixer are included. Aluminum is used to make the microphone. As with any Rockville product, it is extremely durable and sturdy. The broad diaphragm of this microphone allows it to deliver a wider range of high and low frequencies than its rivals. We test our frequency range between 30Hz and 20kHz! The microphone produces a distortion-free, crystal-clear sound! Surface mounted components are used on the PCB (circuit board), which is the same technique used by high-end companies. We only utilize premium components that have passed rigorous testing conducted by our own audio engineers.Last but not least, I want to emphasize how robust our product is. I'll explain. You do not want even a minute amount of noise when you are recording. sound coming from your microphone. The microphone is made up of a case, which also contains a cartridge. That cartridge shouldn't be moving around at all. Our mechanism was adjusted to make sure the cartridge was securely in place and making no unwelcome noises.

Included:

• Aluminum-made RCM03 Condenser Microphone
• 10 foot 100% copper 3.5mm jack to XLR cable for connecting a microphone to a computer or other device.
• 10 foot 100% copper XLR to XLR cable for phantom power connections to any mixer
• Mount for metal shocks
• metal cap with anti-wind foam
• Owners Guide
• Assurance card

Features:

• Uni-directional
• Metal Shock Mount + Rockville RCM03 Pro Studio Recording Condenser Microphone
• high-quality aluminum structure
• Internally polarized condenser cardioid design: Polar Pattern
• a large diaphragm for reduced noise and a smooth, realistic sound
• Phantom Power at 48V DC is needed.
• Sensitivity: -27 dB at 2 dB (0 dB=1 V/Pa at 1 kHZ)
• 20030% output impedance (at 1kHz)
• 3V is the typical working voltage.
• 1.5V?10V is the operating voltage range.
• Consumption of current: less than 500uA
• Characteristic of voltage deduction: within 3dB at 2V
• S/N ratio: above 24 dB
• Response to Frequency: 30Hz to 20KHz
• 40Hz?16 KHz is the fixed cross-over filter cutoff frequency.
• Greater or equal to 1000 Ohms for the load impedance
• Noise level equivalent: less than 18 dB A (IEC581-5)
• Max. SPL at 1 kHz: 126 dB (THD: 1.0%).
• greater than 4.8Ma of electrical current
• Net weight of the microphone: 320 Grams (0.7 Pounds)
• Maximum diameter of a microphone: 44mm (1.73 inches).
• Length of the microphone: 217mm (8.54" inches).
• Aluminum and steel grille make up the microphone (handheld part)
• Surface mount is a PCB layout.
• Owner's Guide

Specifications:

• Brand:  Rockville
• Connector(s): XLR 3 Pin, 3.5 mm (1/8 in) TRS    
• Type: Condenser Microphone
• Connectivity: Wired    
• Model: RCM03
• Instrument: Recording Condenser Microphone    
• Form Factor: Handheld/Stand-Held
• Polar Pattern  Cardioid
• Suitable For: Studio Recording    
• Features:  Mountable, On/Off Switch, Shockmount
• clips, Rugged Construction
• Country/Region of Manufacture  China    
• Maximum SPL: 126