Rockville RCM02 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount

This microphone has a variety of applications. This can be connected directly to your computer sound card or to the phantom power of your mixer. The two cords are included! We provide both a cable to connect the microphone to your computer and a cable to connect it to your mixer. Aluminum is used to make the microphone. As with any Rockville product, it is extremely durable and sturdy. The broad diaphragm of this microphone allows it to deliver a wider range of high and low frequencies than its rivals. We test our frequency range between 30Hz and 20kHz! The mic sounds crystal clear sound with no distortion.

Features:

• Surface mounted components are used on the PCB (circuit board), which is the same technique used by high-end companies.
• We only utilize premium components that have passed rigorous testing conducted by our own audio engineers.
• Last but not least, I want to emphasize how robust our product is.
• You do not want your microphone to make any sounds when you are recording.
• The microphone is made up of a case, which also contains a cartridge.
• That cartridge shouldn't be moving around at all.
• Our mechanism was adjusted to make sure the cartridge was securely in place and making no unwelcome noises.

Specifications:

• Owner's Guide
• Uni-directional
• Surface mount is a PCB layout.
• High-quality aluminum structure
• Phantom Power at 48V DC is needed.
• Sensitivity: -29 dB at 2 dB (0 dB=1 V/Pa at 1 kHZ)
• 20030% output impedance (at 1kHz)
• 3V is the typical working voltage.
• 1.5V?10V is the operating voltage range.
• Consumption of current: less than 500uA
• Characteristic of voltage deduction: within 3dB at 2V
• S/N ratio: More than 24dB
• Frequency Response: 30Hz - 20 KHz
• 40Hz?16 KHz is the fixed cross-over filter cutoff frequency.
• Greater or equal to 1000 Ohms for the load impedance
• Noise level equivalent: less than 18 dB A (IEC581-5)
• Max. SPL at 1 kHz: 126 dB (THD: 1.0%).
• greater than 4.8Ma of electrical current
• Net weight of the microphone: 380 Grams (0.84 Pounds)
• 51mm (2") maximum diameter of the microphone
• Length of the microphone: 215mm (8.46" inches).
• Internally polarized condenser cardioid design: Polar Pattern
• A large diaphragm for reduced noise and a smooth, realistic sound
• Metal Shock Mount + Rockville RCM02 Pro Studio Recording Condenser Microphone
• Aluminum and steel grille make up the microphone (handheld part)

Included are:

• Owners Guide
• Assurance card
• Mount for metal shocks
• Metal cap with anti-wind foam
• Aluminum-made RCM02 Condenser Microphone.
• 10 foot 100% copper XLR to XLR cable for phantom power connections to any mixer