iPower 4 Feet 54W 6400K Fluorescent T5 Grow Light Stand Rack for Seed Starting

In any growth environment, the T5 System from iPower offers performance, adaptability, and high lumen output. With these daisy-chainable systems, you may choose from a variety of hanging arrangements to suit the style of your garden. By combining an energy-efficient aluminum reflector with high-output T5 bulbs, fluorescent lighting systems are able to produce twice as much energy.

Features

PERFECT FOR INDOOR PLANTS:Lighting system for germination of seeds, cuttings, and indoor flower and plant growth

EASILY ADJUSTABLE AND STURDY: The fixture is simply raised or lowered using the Feather-Touch height-adjustment mechanism, and the entire metal structure is quite strong.

PREMIUM QUALITY UL/CSA LISTED: Maximum coverage is provided with a T5 high output fluorescent light with a large reflector and one T5 bulb.

ENERGY EFFICIENT: with a super reflective inside finish and a high power full daylight spectrum bulb, a 6' grounded wire, and an on/off button
Approximately 50 by 18 1/2 by 30 inches, incredibly simple to assemble, one-year warranty

PARTS LIST

•  2 - Vertical Leg Bar
• 2 - Foot Bar
• 2 - Hex Bolts
• 1 - Hex Key / Allen Wrench
• 1 - Crossbar with Cord & Lock
• 1 - T5 Fluorescent Fixture
• 1 - T5 High Output Fluorescent Lamp
• 1 - Power Cord with On/Off Switch

INSTALLATION INSTRUCTIONS

• Install the two foot bars perpendicularly onto the vertical leg bars. Align the tapped screw hole with the foot bar's center and the leg bar's end. Using the two 4mm hex bolts and the included Allen wrench, fasten the foot bars to the vertical leg bars.
• Place the crossbar so that the square holes are facing up on a stable flat surface. Slide the opposite leg bar end into the crossbar after attaching the foot bar. Make sure the leg bars are firmly seated in the crossbar.
• Elevate the building. In order to hang your light fixture, we advise placing it over a chair or other raised surface.
• Pull the hanger cables down and place the light fixture under the crossbar as shown in the diagram. Connect the rings on the adjustable cables to the hanger clips on the T5 fixture.
• By altering the length of the cable in the crossbar's middle and setting the height by tightening the locking mechanism against the crossbar, you may change the height of the light fixture.