Inkbird Humidity Controller Wired Reptiles IHC-200 Humidifier Wet Fan 110V Relay

This humidity controller is frequently used in greenhouses, grow rooms, mushroom houses, reptile humidifiers/dehumidifiers, and biltong production. Automatically switch between humidification and dehumidification settings.

Features:

• humidity measurement
• How hysteresis works
• Correction for humidity
• Delay defense
• Humidification, dehumidification, and other functions
• alarm when humidity exceeds the limit if there is a sensor fault
• Utilize Humirel's HTG3535CH humidity sensor
• The probe is WATERPROOF, which can stop gases like mist and water vapor from liquefying.

Specifications:

•  Power Input: 100 ~240VAC, 50Hz/60Hz
• Power Output: Max. 10A, 100V ~240V AC
• Humidity Measuring Range : 5%-99.99%RH
• Humidity Control Range : 5%-99%RH
• Resolution: 1%RH
• Accuracy: ±3%RH
• Input Power Cable Length: 1.5m (5ft)
• Output Power Cable Length: 30cm (1ft)
• Dimension: Body: 140x68x33mm (5.5x2.7x1.3inch)
• Socket: 85x42x24mm(3.3x1.7x1inch)
• Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
• Storage: Temperature : -30~ 75 ° C / -22~ 167 ° F ; Humidity 20~85% (No Condensate)

Mode

• Switch the modes between humidification and dehumidification automatically.

Application:

• This humidity controller is widely used in reptile humidifiers/dehumidifiers, greenhouses, grow rooms, mushroom houses, and biltong making.

What You Get:

• 1x IHC-200 Humidity Controller
• 1x Humidity Sensor

Solid Sockets

• Power Output: Max. 10A, 100V ~240V AC
• Work 1:To control the humidifier
• Work 2:To control the dehumidifier

Decide on 50 for "HS" (Traget Humdity).

• Turn on the electricity
• 3 seconds of "SET" button pressing will bring up the "HS" humidity setting.
• To set the humidity at 50%, press either the up or down button.
• Decide on 3 for "HD" (Humidification Differential Value).

By pressing "SET," choose "HD."

• Adjust the humidity to 3% by pressing the up and down buttons.
• Dehumidification Differential Value should be set to 5.

For "DD," press the "SET" button.

• Adjust the humidity to 5% by pressing the up and down buttons.