HD Manual Oil Press Machine Expeller Extractor Stainless Steel#304 Homemade Oil

This manual oil press machine is strong, made of food-grade 304 stainless steel, resistant to rust and corrosion, energy-efficient, and safe for your health. Additionally, you won't need to worry because the provided bottles can be changed out for regular home bottles. The ergonomic hand crank is also labor-efficient. We have everything you need, so after everything is in place, you can effortlessly turn the hand crank to extract the oil while enjoying the process and tasting the purest, healthiest oil. Simply put together the stainless steel oil press machine piece by piece to begin producing new oil. In addition to the machine, we also provide you with a clean brush to make cleaning it easier. Our oil extractor machine's semi-circular baffle is made to hold the alcohol bottle in place while it is in use and to protect you even if it is inadvertently shattered. Please avoid touching the press cage or any other metal parts of the machine while it is in operation as they may become quite hot. Utilize our oil expeller extractor to create your own nutritious homemade oil. Our home oil extractor is appropriate for the majority of oil crops with an oil content of above 25%, including peanut, sunflower, tea, sesame, walnut, coconut, flaxseed, and others.

Tips:

• Please properly clean and dry all parts before each usage.
• Consuming freshly pressed oil within two to three days requires letting it cool for five to seven hours.
• Oil and extracts naturally trickle out of the terminal adjustment bolt at first.
• To catch the residue, you might put a plate or container at the bottom.

Features:

• Give yourself a healthy and nourishing life by using a manual oil expeller.
• adopting corrosion-resistant and long-lasting high-quality stainless steel as a material
• full complement of attachments, easy to install
• More than 25% of oil crops, including peanuts, sunflower seeds, tea seeds, sesame seeds, walnuts, olives, coconut oil, flax seeds, and others, are suitable for the majority of the oil content.
• The frame, press cage, handle, and heating component make up this brand-new manual oil press machine. Make your own natural, healthy oil at home.
• The oil could used as a body moisturizer or in cooking. As you will have made it yourself, you will be certain that it is 100% healthy and pure. a wonderful method to live well.
• This device can be utilized by amateur cooks as well as chefs who take pride in producing everything from scratch.
• Everything you need to construct the machine is already present, and it can be set up in a few minutes.
• Walnuts, peanuts, and other ingredients must be purchased separately. Additionally, the kit only includes one oil bottle; after using it, you can either wash it and reuse it or purchase extra bottles.
• Standard household bottles can be used to replace (and recycle) the oil bottle.
• The recent oil ought to be It should be consumed within two to three days of preparation after being permitted to cool for 5-7 hours.

Installation:

• All parts should be meticulously cleaned and dried before use.
• Attaching the frame to the L-shaped metal component comes first.
• The L-shaped metal component and the frame both have three pre-drilled holes that need to be lined up and fastened together with the included bolts to form one unit.
• The rack should then be secured to a solid surface. The bolts should be inserted from the bottom and tightened until the frame is securely fastened to the table.
• If your table edge isn't thick enough, you can utilize the round metal pieces that come with it as gap fillers and as protection for your table.
• The handle: Attach the crank at the handle's base first. The handle is then inserted into the pre-drilled holes in the screw shaft at the press cage's end.
• And the bolt is used to secure it. Verify that the handle rotates easily and smoothly.
• The press cage cap and terminal adjustment bolt should be fastened to the front of the press cage.
• Fuel bottle: Place the supplied wick into the metal cap's pre-drilled hole. Kerosene or alcohol fuel should be added to the bottle until it is 80% filled.
• Put the longer end of the wick in the fuel container, leaving 0.5 cm of it exposed. Put the fuel container outside, underneath the press cage.
• To ensure that the gasoline bottle remains in place and does not move while operating, secure it with the rubber band.
• Plastic oil bottle: Set the bare plastic oil bottle beneath the press cage's aperture. The useful oil will be collected in the bottle.
• In the future, if you use your own bottle, be sure it is heat resistant.
• Inlet Plate: Place the plate on top of the press cage and fill it with the raw ingredient.

Note:

• It is very typical for oil and extracts to initially pour out of the terminal adjustment bolt. To catch this residue, you might put a plate or container at the bottom.
• When using the handle, you can release the terminal adjustment bolt if you discover it to be excessively stiff.
• You should tighten the adjustment bolt if you discover there is too much oil in the press cage.
• You can add additional oil to an item to make it pass through the press more easily if the ingredient you want to utilize is very small, like sesame seeds.
• Consuming freshly pressed oil within two to three days requires letting it cool for five to seven hours.
• After each usage, the machine must be completely cleaned; otherwise, any leftover residue will harden and interfere with the equipment's ability to function. If the device has been in storage or hasn't been used for a while, it should also be cleaned before usage.
• During operation, the press cage and all the metal components of the machine may become extremely hot. Please use caution and put on the appropriate safety gear. Keep your hands away from the heated surfaces. Before cleaning and disassembling the equipment, let it cool down.
• You can use the metal circular caps to shield your table from dents and screw marks. They if your table is too tiny and the screws do not reach the table, can also serve as a gap filler.

Specifications:

• Silver in color
• Press cage: 1
• Screw Shaft: 1
• Press Cage Cap: 1
• 1 fuel container
• 1 crank
• Funnel, 1
• 1 bottle of plastic
• 2 brushes
• Wrench, 1
• 304 stainless steel is the material.
• Bolt for Terminal Adjustment No. 1
• one requirement for operations
• All Required Assembly Tools, Exactly As Shown
• Framework, Exploding Bolt, and Pressing Bolt comprise the majority of the structure.
• Suitable Raw Materials: More than 25% of oil crops have a high oil content.
• Size: Oil Mill Size (270 X 50 X 350 mm) (Including Packaging)
• Size of the package: 15" X 11.8" X 3.5" (375 X 300 X 75 mm).

'Product Content:

• A single manual oil press machine
• 1 bottle of oil
• 1 bottle of alcohol
• Unclean Brush: 1