drill bit guide tool: comparable to a portable drill press -no bushings required

All drill and tap guides are made from steel that has been heat-treated for durability, and the guides have a precision-ground base to ensure stability and accurate perpendicular alignment of drill bits on flat surfaces. A 90-degree "v-groove" design allows for perpendicular alignment on rounded and cornered materials. Can be used on flat surfaces, rounded parts, and corners; lifetime warranty; and superior quality that is entirely American-made. Portable, small enough to fit in your pocket, and created entirely in the USA.

• Plastic storage tube, free
• Excellent for use in or around the house, shop, or garage!

 Specifications:

• Type: Drill
• Material: Steel
• Model: V-DrillGuide
• Brand: Big Gator Tools
• Warranty: Lifetime Warranty
• Country of Manufacture: United States
• Country/Region of Manufacture: United States
• Packaging: FREE Protective Hanger Case for each guide
• Features: Use on corners, round or flat materials

The Common V-Drill Guide:

• (17 holes in 1/64" increments)
• Are available in the size range
• (1/8"- 3/8"): 1/8, 9/64, 5/32, 11/64, 3/16
• 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64
• 5/16, 21/64, 11/32, and 23/64, 3/8

Included:

• Standard V-DrillGuide® (1/8"?3/8"), first
• 1 - A storage tube for protective hangers

Typical V-Drill Guide:

• Drill guide has 17 drill sizes in 1/64"
• Increments and is sized for drill bit sizes from 1/8 to 3/8. 1/8
• 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32
• 19/64, 5/16, 21/64, 11/32, 23/64, and 3/8 are some of the drill sizes.

Simple to use:

• With the "v-groove" side of the drill guide resting on the drillable surface
• Clamp the material while holding the drill guide in place.

A helpful tip:

• Use a center punch to mark the location of the hole to be drilled,
• And then align the drill guide with the proper drill size using a transfer punch.
• Drill a straight hole when clamped into place. Punches for transfers are not included.
• Not included are the clamp, drill, drill bit, and accessories.