Crystal Clear Epoxy for bar tops, tables, crafts, jewelry, castings-1 Gallon Kit

• The total amount of this kit is one gallon. The hardener and resin each weigh 3.14 pounds and 4.10 pounds, respectively. made with a variety of applications in mind. Specially designed with a high gloss finish, low viscosity, convenient 1:1 mix ratio by volume, long pot life, and room temperature curing system.
• This product exhibits good air release and a very hard cure. This resin is a candidate for all applications due to excellent chemical and water resistance(s), as well as superb mechanical properties.
• Perfect for tabletops, fiberglass work, small castings (under 2"), electrical potting, jewelry making, coating pebbles for concrete, marine applications (boat building), and waterproofing and repairing wood.
• This product enables a rapid return to service by providing fast cure and property development at ambient and low temperatures without accelerators. This item's typical pot life, which depends on mass and temperature, is 45 to 50 minutes. At 78F, the set time for thin film (3 mil. films) is about 5 hours. This product is excellent for all applications because it has a quick cure and green time and exhibits low exothermic temperatures (120C). In typical circumstances, a full recovery takes 24 hours.
• The finish on this product dries to a brilliant high gloss. The final product will have a brilliant high gloss finish resembling glass, be extremely rigid, smooth, and clear.