AKG C414 XLII Large Diaphragm Studio Condenser Microphone XLR 3 Pin New

Condenser Microphone, 9-pattern, Akg C 414 Xl Ii (with Boom Stand And Monster Cable). The C414 Xl Ii, The Famed C414 B-tl Ii's Successor, Exhibits The Distinctive Sonic Signature Of The Highly Sought-after Akg C12, Allowing Lead Vocals And Solo Instruments To Be Positioned Even In A Busy Mix. The Unmatched Front Sound Is Especially Well-known For Remote Miking Uses Like Drum Ambience Miking Or Vintage Music Recording.

Features:

• Nine different pickup patterns allow you to find the ideal configuration for every application.
• Lock Mode: for trouble-free use, all controls can be readily disabled.
• Even the shortest overload peaks are detected by the Peak Hold LED.
• 152 dB of incredible dynamic range
• Three pre-attenuation stages and three switchable bass cut filters
• Modern components and cutting-edge technology guarantee the quickest signal path and additional moisture protection.
• Austrian design, engineering, and construction.

Specifications:

• Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight, and four intermediate settings are available for polar patterns.
• Range of frequencies: 20 to 20,000 Hz
• Twenty mV/Pa (-34 dBV) is the sensitivity. 0.5 dB
• Maximum SPL is 140/146/152/158 dB (0/-6/-12/-18 dB) for 0.5% THD at 200/400/800/1600 Pa.
• Noise level equivalent: 6 dB-A (preattenuation of 0 dB) (IEC 60268-4)
• A-weighted signal-to-noise ratio: 88 dB
• Preattenuation pad: switchable at 0 dB, -6 dB, -12 dB, and -18 dB
• Bass cut filter slope: 6 dB/octave at 160 Hz, 12 dB/octave at 40 Hz and 80 Hz.
• Impedance: 200 ohms or less
• A load impedance of at least 2,200 ohms is advised.
• 48 V phantom power to DIN/IEC for supply voltage
• approximately 4 mA for powering
• Three-pin XLR to IEC connector
• Dark grey/gold finish
• 50 x 38 x 160 mm are the dimensions (2.0 x 1.5 x 6.3 inches)
• Weight at rest: 300 g (10.6 oz.)
• Patent(s): Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)